AMD Radeon 400 Series Launching Summer of 2016 – Features 2X Performance Per Watt With 14nm FinFET

AMD’s next generation “Arctic Islands” family of Radeon 400 series is one that many gamers have been eagerly awaiting for so long, as it represents the first major generational leap in performance and efficiency since the introduction of the HD 7000 series in January of 2012. This is because it's the very first generation of Radeon graphics chips to feature next generation FinFETs, rather than the aging 28nm process that spans everything from the 300 series, Fury series and Nvidia's 900 series .

The Arctic Islands family of GPUs has been subject to numerous leaks in the past, unfortunately none of which had any information about when they were actually going to be released. There hasn't been any reliable information about Arctic Islands' release timeframe, that is until today. We have confirmed that the company is planning to introduce its next generation 14nm / 16nm family of graphics cards throughout the summer of 2016 and into the back to school season. The launch is still too far out to make out any specific details and we have yet to confirm what the new series will actually be called, so we're going to use "400 series" as placeholder until then.

This goes hand-in-hand with what he had exclusively reported last month about AMD successfully completing the design of several “Arctic Islands” R 400 series GPUs which have been taped out and are on track to begin mass production.  TSMC's 16FF+ process is already in volume production at mature yields, with additional capacity and mass production expected by next year as both Nvidia and AMD ramp-up their next generation 16nm products. All in all the company expects to triple its 16nm capacity by the end of next year.

AMD Radeon 400 Series Arctic Islands - Second Generation Stacked Memory "HBM2" & 2X The Performance Per Watt

AMD's President and CEO Lisa Su confirmed this past October the company's plans to update the entire graphics line-up over “the coming quarters” with a new set of products that have “2X the performance per watt” of the current Radeon R9 Fury and 300 series of graphics cards. And as mentioned earlier we've managed to confirm exactly when AMD is planning to launch its new family of GPUs, beyond Lisa Su's broad statement at last quarter's earnings teleconference, and it'll be in the summer of next year.

Lisa Su – Advanced Micro Devices, Inc. – President, CEO – Q3 2015 Earnings Teleconference

We are also focused on delivering our next-generation GPUs in 2016 designed to improve performance per watt by 2X compared to our current offerings, based on design architectural enhancements, as well as advanced FinFET process technology.

Despite the existence of three+ different iterations of GCN, namely GCN 1.0 ( HD 7000 series ) , GCN 1.1 ( R9 290 series) , GCN 1.2 ( R9 285 and 380) and Fiji ( R9 Fury X, R9 Fury and R9 Nano) which is based on an updated GCN 1.2 design; according to AMD’s Chief Technology Officer Mark Papermaster AMD only recognizes having introduced two main generations of GCN so far. With the next major iteration to come out next year in the form of the “Arctic Islands” family of graphics chips.

Arctic Islands will feature three major improvements over AMD’s current current R 300 series and Fury series line-up. These include second generation HBM, next generation "Arctic Islands" GCN architecture as well as a more advanced 14/16nm FinFET manufacturing process. The three of which mean that for the first time since 2012 we're going to get a truly next generation family of GPUs, with performance and power efficiency levels that vastly exceed what we see today from the 28nm 300 series and Fury series.

2 of 9

At 1 Terabyte/s of memory bandwidth HBM 2.0 offers double the bandwidth of HBM 1.0 found in the R9 Fury X which features a 4096bit memory interface, 4GB of VRAM and a total of 512GB/s of bandwidth. The flagship GPU in the Arctic Islands family has been numerously purported as “Greenland“. Which is set to be AMD’s most powerful and most advanced graphics chip to date. Greenland is rumored to feature up to 18 billion transistors and 32GB of second generation HBM with 1TB/s of memory bandwidth. Making it the largest ever graphics engine conceived by the company, at approximately twice the transistor count of AMD’s current flagship code named “Fiji” powering the Fury series of Radeon graphics cards.

The Arctic Islands graphics architecture will power everything from next generation mobile and desktop GPUs to APUs and semi-custom chips. There’s also strong evidence to suggest that Nindendo’s next generation gaming device “Nintendo NX” – which is coming next year – will be powered by an AMD semi-custom SOC. Making it a very likely candidate to feature AMD’s 3rd generation “Arctic Islands” GCN architecture.

AMD Radeon 400 Series Arctic Islands To Feature 14nm / 16nm FinFET Process

AMD’s chief technology officer, Mark Papermaster, announced last month that AMD will in fact be leveraging Globalfoundries' 14LPP process for CPU, APU and GPU products. Which was a very interesting development to say the least as It was confirmed back in August that AMD is also in fact one of TSMC’s clients for the 16nm node. The very same process that Nvidia had officially confirmed earlier in the year that it will be using for its next generation Pascal GPUs in 2016.

FinFET technology is expected to play a critical foundational role across multiple AMD product lines, starting in 2016, GLOBALFOUNDRIES has worked tirelessly to reach this key milestone on its 14LPP process. We look forward to GLOBALFOUNDRIES’ continued progress towards full production readiness and expect to leverage the advanced 14LPP  process technology across a broad set of our CPU, APU, and GPU products. - Press Release

TSMC’s 16nm FinFET process node offers equally impressive figures with double the transistor density of current 28nm technology as well as faster switching speeds and finally significantly lower power consumption.

TSMC.com
TSMC’s 16FF+ (FinFET Plus) technology can provide above 65 percent higher speed, around 2 times the density, or 70 percent less power than its 28HPM technology. Comparing with 20SoC technology, 16FF+ provides extra 40% higher speed and 60% power saving. By leveraging the experience of 20SoC technology, TSMC 16FF+ shares the same metal backend process in order to quickly improve yield and demonstrate process maturity for time-to-market value.

It will be interesting to see how things play out next year with Nvidia’s Pascal GPUs which will also be produced on TSMC’s 16nm FinFET process and feature second generation High Bandwidth Memory.  How much exactly  Pascal and Arctic Islands GPUs are going to cost will depend almost entirely on the production yields and volumes of the leading edge FinFET node next year. But so far this is shaping up to be one of the biggest performance and power efficiency boosts we’re going to see from a new generation of graphics cards in a long while.